Listening To The Radio - Teac SR-2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
1
1
Select "TUNER" using the FUNCTION button.
2
Select FM or AM using the FM/AM button.
3
Select the station you want to listen to (auto
selection).
Hold down the skip button (.or/) for more than
2 seconds and release it when the frequency display
begins to change.
When a station is tuned in, the tuning process will stop
automatically.
< To stop the auto selection, press the skip button.
S e l e c t i n g s t at io ns w hi c h c a nno t b e t u n e d
automatically (manual selection)
When the skip button (.or/) is pressed
momentarily the frequency changes by a fixed step.
Press the skip button repeatedly until the station you
want to listen to is found.
18

Listening to the Radio

2
3
< You can also use the TUNING knob to select the station.
If the reception is poor
For the best reception, rotate the FM or the AM antenna
until you get stations clearly.
FM MODE button
Pressing this button alternates between Stereo mode
and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the
"STEREO" indicator lights in the display.
< If the sound is distorted and the "STEREO" indicator
blinks, the signal is not strong enough for good stereo
reception. In this case, change to MONO mode.
Mono
To compensate for weak FM stereo reception, select
this mode. Reception will now be forced monaural,
reducing unwanted noise.

Publicité

Table des Matières
loading

Table des Matières