Basic Operation; Sleep Timer - Teac SL-D910 Manuel Du Propriétaire

3
1 Press the STANDBY/ON switch to turn the unit
on.
2 Press the FUNCTION button to select a source.
3 Play the source and adjust the volume using the
VOLUME knob.
Muting
To mute the sound temporarily, press the MUTING
button. Press the MUTING button again or adjust the
volume to restore the sound.
< While muting is activated, the MUTING indicator
lights up.
< When the FUNCTION button is pressed, muting will
be cancelled.
14

Basic Operation

2
1
Headphones
For private listening, connect the headphones plug
into the PHONES jack, and adjust the volume using
the VOLUME knob. The sound from the speakers is
cut off while the headphone is connected.

Sleep timer

Each press of the SLEEP button permits setting an
interval (from 90 down to 10 minutes). The unit will
automatically turn off and then into Standby mode.
Each press of the SLEEP button changes the time
indication by 10 minutes.
90
< When you want to check remaining time, press the
SLEEP button once.
< If you press the SLEEP button twice, the sleep timer is
set 90 again.
.........
80 10
Off