Teac SL-D910 Manuel Du Propriétaire page 19

1, 2, 3....
To check the programmed order
In the stop mode, press the MEMORY button
repeatedly. The track number and programme
number will be shown on the display.
To clear program
To clear the programmed contents in the stop mode,
press the MEMORY and the STOP button (H) for
more than 2 seconds.
< When you open the disc compartment cover, the
programmed contents will also be cleared.
< If the power supply is interrupted, the programmed
contents will also be cleared.
To add a track to the end of the
programme
MEMORY/TIME SET
To overwrite the programme
In the stop mode, press the MEMORY button
repeatedly until "00" or "000" appears on the
display. Select a track number using the numeric
buttons or the SKIP button (.or/) and then
press the MEMORY button. The track is added to the
end of the programme.
In the stop mode, press the MEMORY button
repeatedly until the programme number to be
changed appears on the display.
Select a new track number using the numeric buttons
or the SKIP button (.or/) and then press the
MEMORY button.
19