Setting The Timer 1 - Teac SL-D910 Manuel Du Propriétaire

Adjust the clock before setting the timer.
This timer function can be set ON time, OFF time,
source and volume independently.
ON time
1
Press the CLOCK/TIMER button to display "ON".
2
Press the TIME SET button.
The "hour" value blinks.
< When no button is pressed for 8 seconds, the timer
setting mode will be cancelled.
3 Press the SKIP button (.//) to set the hour,
and then press the TIME SET button.
The "minutes" value blinks.
26

Setting the Timer 1

CLOCK/TIMER
MEMORY/TIME SET
4 Press the SKIP button (. // ) to set the
minute, and then press the TIMER button.
5
Press the TIME SET button.
Now the ON time is set.
Or when no button is pressed for 8 seconds, the time
is set and the display will go back to normal mode.
OFF time
1
Press the CLOCK/TIMER button to display "OFF".
2
Press the TIME SET button.
3
Press the SKIP button (.//) to set the hour,
and then press the TIME SET button.
The "minutes" value blinks.