Teac SL-D910 Manuel Du Propriétaire page 27

4 Press the SKIP button (. // ) to set the
minute, and then press the TIMER button.
5
Press the TIME SET button.
Now the OFF time is set.
Or when no button is pressed for 8 seconds, the time
is set and the display will go back to normal mode.
Source
1 Press the CLOCK/TIMER button to display source.
2 Press the TIME SET button.
3
Press the SKIP button (.//) to select a
source (CD, USB or TUNER), and then press the
TIMER button.
4
Press the TIME SET button.
Now the Source is set.
Or when no button is pressed for 8 seconds, the
source is set and the display will go back to normal
mode.
When the source is set to "CD", set a CD.
When the source is set to "USB", plug the USB
memory card into the USB connector.
When the source is set to "TUNER", tune in a station.
< When the source is set to "CD" but no disc is loaded,
and when the source is set to "USB" but no USB
memory card is plugged, the timer will work in
TUNER mode.
VOLUME
1
Press the CLOCK/TIMER button to display "VOL".
2
Press the TIME SET button.
3
Press the SKIP button (. // ) to set the
volume, and then press the MEMORY button.
Now the Volume is set.
Or when no button is pressed for 8 seconds, the
volume is set and the display will go back to normal
mode.
27