Programmed Playback - Teac SL-D910 Manuel Du Propriétaire

3 4
Up to 60 tracks can be programmed in the desired
order.
Shuffle and Repeat functions do not work during

programmed playback.

1 Press the FUNCTION button to select "CD" or
"USB".
2
Press the MEMORY button.
"MEMORY" blinks on the display.
< To cancel the programme mode, press the STOP
button (H).
18
Programmed Playback
3
Press the numeric buttons (or press the SKIP
button (.//) repeatedly) to select a folder
1
on a MP3 disc or USB memory card, then press
2
the MEMORY button.
< MP3 tracks recorded out of folders are in the "01"
5
(ROOT) folder.
< Skip this step when playing a CD.
4
Press the numeric buttons (or press the SKIP
button (.or/) repeatedly) to select a track,
then press the MEMORY button.
The track is programmed, and "P-02" is displayed.
< Repeat steps
< You can program up to 60 tracks.
5
When the selection of track numbers is
completed, press the PLAY/PAUSE button (G/J)
to start programmed playback.
< When the playback of all the programmed tracks has
finished, or if one of the following buttons is pressed,
the MEMORY indicator will go off and the
programme mode will be cancelled:
The programme is retained in memory until you open
the disc compartment cover or the power is
interrupted. You can return to the programmed
playback by pressing the MEMORY button and the
PLAY/PAUSE button (G/J). (If another source was
selected, select the CD or the USB mode by pressing
the FUNCTION button beforehand.)
3 and 4 to program more tracks.
STOP, FUNCTION, STANDBY/ON