Setting The Timer; Timer 1 - Teac SR-L230i Manuel Du Propriétaire

ALARM 1, ALARM 2
< The unit can be set two different timer setting
separately.
< Adjust the clock before setting the timer (see page
12).

Setting the timer

1
Press and hold the ALARM 1 or ALARM 2
button for more than 2 seconds to display
"ON".
The clock and the Timer indicator (
blinks on the display.
< If no button is pressed for about 8 seconds, the
timer setting mode will be cancelled.
2 Press the skip buttons (. or /) to set the
hour, and then press the ALARM 1 or ALARM 2
button.
20

Timer 1

/
or )
3
Press the skip buttons (. or /) to set the
minute, and then press the ALARM 1 or
ALARM 2 button.
Now the on time is set.
"OFF" and the off time value blink.
4 Press the skip buttons (. or /) to set the
hour, and then press the ALARM 1 or ALARM 2
button.
5 Press the skip buttons (. or /) to set the
minute, and then press the ALARM 1 or
ALARM 2 button.
Now the off time is set.
"iPod" or "TUNER" blinks.
6 Select a source (iPod or TUNER) using the skip
buttons (. // ), and then press the
ALARM 1 or ALARM 2 button.
< You cannot select "AUX".