Product Presentation; General Description - ADEUNIS WMBUS DRY CONTACTS Guide Utilisateur

WMBUS DRY CONTACTS - Guide utilisateur / User guide version V2.0.0

1. PRODUCT PRESENTATION

IMPORTANT NOTE: The WMBUS DRY CONTACTS can only be started with a magnet.
Description:
• The adeunis® WMBUS DRY CONTACTS is a ready-to-use radio transmitter enabling the user to transfer statuses and alarms on a
WMBUSnetwork.
FR
• This product meets the needs of users who require to remotely monitor simple on-off digital data: detection of door opening, presence,
machine starting, warning, etc.
• The use of the WMBUS protocol allows you to integrate the WMBUS DRY CONTACTS into any network that is already deployed.
• Four digital inputs can be supported by a single WMBUS DRY CONTACTS transmitter.
• The product emits the data either periodically or in an event-related way on a change of state.
• The configuration of the transmitter is accessible by the user via a micro-USB port, allowing in particular a choice of modes of transmission,
periodicity or type of interface (input/output).
EN
• The WMBUS DRY CONTACTS is powered by a replaceable internal battery.
Composition of the package
The product is supplied in a cardboard box containing the following items:
top casing, electronic card, casing base plate,
cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs,

1.1. General description

Casing base
49,50
Antenna
2 holes for passing
collars through
4 fastening holes
Rail-DIN unlocking
lever
Casing base detail
Cables outlet
packing gland
44 of 75