ADEUNIS WMBUS DRY CONTACTS Guide Utilisateur page 58

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WMBUS DRY CONTACTS - Guide utilisateur / User guide version V2.0.0
320
1
FR
EN
321
1
322
1
323
1
3.4.2 Network register
The list of registers below allows you to change the behaviour of the product application. This list is accessible in Provider mode following
execution of the ATT63 Provider command.
These registers must be handled with caution because they could cause problems of communication or of non-compliance with the legislation in
force.
Registre
Description
200
Canal WMBUS
201
Format de trame
221
Mode AES
Input TOR1 configuration:
Configuration of the input TOR2
Configuration of the input TOR3
Configuration of the input TOR4
Codage
Décimal
Décimal
Hexadécimal
Hexadecimal Default : 0x46
Bits 0 to 3: Type
• 0 = Disabled
• 1 = Input - Periodic Mode - High edge
• 2 = Input - Periodic Mode - Low edge
• 3 = Entrée - Periodic Mode - High and low edge
• 4 = Entrée - Event Mode - High edge
• 5 = Entrée - Event Mode - Low edge
• 6 = Entrée - Event Mode - High and low edge
• 7 = Do not use
• 8 = Do not use
Bits 4 to 7: Duration of the waiting period
• 0: None
• 1: 10 ms
• 2: 20 ms
• 3: 50 ms
• 4: 100 ms
• 5: 200 ms
• 6: 500 ms
• 7: 1 s
WARNING : if none of the TOR inputs is configured (value =
Disabled), the product will send the configuration frame 0x10
periodically (period defined by register 300).
Hexadecimal See details of register 320
Hexadecimal See details of register 320
Hexadecimal See details of register 320
Défaut : 24
Min/max : 4 à 12
Unité : aucune
Voir Note 1
Défaut : 1
Valeurs possibles :
• 0 : format A
• 1 : format B (minimize frame duration)
• 2 : 'Universel' (TX=B, RX=A+B)
Défaut : 0x0000 (pas d'AES)
Valeurs possibles :
• 0x0000 : pas d'AES
• 0x0001 : AES128 avec CBC. Utilisation de la clé définie dans les registres
S222 à S225
Note : cryptage de l'ensemble des octets de la payload. Le cryptage est fait par
bloc de 16 octets. Si un bloc est inférieur à 16 octets, le buffer est complété par
des 0xFF avant le calcul AES. Il y aura donc dans ce cas transmission d'octets
additionnels.
• 8: 2 s
• 9: 5 s
• A: 10 s
• B: 20 s
• C: 40 s
• D: 60 s
• E: 5 min.
• F: 10 min.
Détails
58 of 75

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lorawan 868 dry contactsArf8171fa

Table des Matières