Target Priority Mode; Distance Display Units; Battery - Nikon Coolshot 40i Manuel D'utilisation

7. Target priority mode

This Nikon Laser Rangefinder employs the First Target
En
Priority/Distant Target Priority switching system (Factory
Es
default setting is First Target Priority mode).
Fr
First Target Priority mode Distant Target Priority mode
Pt
[ ] [
1. Turn on the power.
2. Press and hold the MODE button, then press and hold
the POWER ON/Measurement button.
Continue to press and hold both buttons (for more than
two seconds) until Target Priority modes are switched.
3. Release both buttons after the mode has switched.
* If the buttons are not pressed in the correct order,
switching will not take place.
[First Target Priority mode/Distant Target Priority mode]
When measuring overlapping subjects, First Target Priority
mode displays the distance of the closest subject and
Distant Target Priority mode displays that of the farthest
subject.
12

8. Distance display units

Measurement results are displayed in yards/meters.
(Factory default setting is yard.)
Yard [ ] Meter
1. Turn on the power.
]
2. Press and hold the MODE button for more than two
seconds. After the display unit has switched, release
the button.

9. Battery

1. Type of battery
3V CR2 lithium battery x1
2. Inserting/replacing battery
[ ]
2-1. Open the battery chamber cover
Rotate the battery chamber cover counterclockwise and remove it. It may not open easily due to its rubber
packing for water resistance.
2-2. Insert the battery/Replace the old battery with a new one
Insert a new battery correctly positioned following the indication seal inside the chamber. The [+] pole should
be positioned toward the inside of the chamber. If the battery is not inserted correctly, the Nikon Laser
Rangefinder will not operate. When replacing the battery, remove the old battery then insert a new one.
2-3. Close the battery chamber cover
Rotate the battery chamber cover clockwise to screw it into the body. It may not close easily due to the rubber
packing for water resistance, but continue to turn it all the way until it stops. Confirm that the cover is securely
closed.
3. Battery level indicator
* The battery condition mark in the internal display warns when the battery needs to be replaced.
4. Battery life
Continuous operation: Approx. 10,000 times (at approx. 20°C)
This figure may differ according to conditions, temperature, and other factors such as target shape, color, etc. Use
only as a guide.
* The battery supplied with this Nikon Laser Rangefinder is for operation checking. Due to natural electrical discharge, the
life of this battery will likely be shorter than that noted above.
* If water enters the battery chamber due to submersion, dry the battery chamber well, then replace the battery.
Display
After power on, displays for 2 seconds only. Sufficient power available.
Power getting low.
After power on, displays for 2 seconds only.
Prepare to replace the battery.
Displayed continuously. Low. Battery should be replaced with a new one.
Blinks. After blinking 3 times, automatically Power exhausted.
powers off. Replace the battery.
En
Es
Fr
Pt
Description
13