General Oven Information - hestan KSO 30 Manuel D'utilisation Et D'entretien

GENERAL OVEN INFORMATION

GENERAL OVEN TIPS
Before using your oven for the first time remove all packing and foreign materials from the
appliance. Any material of this sort left inside may melt or burn when the appliance is used.
EN
FLASHING SYMBOLS OR NUMBERS
Signals an incomplete action that is in progress (locking the door, preheat, etc.) or an incomplete
setting that calls for another input.
BEEPS
Signals that more information must be entered or confirms the receipt of an entry. Beeps also
signal the end of a function or an oven fault.
DOOR LOCK
"AUTO LOCK" appears when the door has been locked automatically due to self-clean mode.
AUTO LOCK flashes when the latch is moving in order to lock or unlock the door. Do not
attempt to open the door at this time. Door can be opened when the symbol no longer appears.
"USER LOCK" is displayed when the door has been locked manually by the user, for example
to prevent children from having free access to the oven cavity. Hold both the
seconds. The latch will lock the door. Repeat the same operation to unlock.
LOCKING THE KEYBOARD
Hold both the keys indicated by "KEYBD. LOCK" legend for 3 seconds. Commands are now
locked and "SENS LOCK" will be displayed every time you touch any keys. Repeat the same
operation for 3 seconds to unlock the keyboard.
POWER FAILURE
After power returns to the oven, the clock displays the time 12.00
Whenever the appliance is powered up, either at installation or after a power failure, it performs
a self-test of the door locking mechanism. The lock symbol will flash during the test. The door
must remain closed until after the symbol stops flashing. If the door is open or an attempt is
made to open it during the test it may cause damage to the lock mechanism and result in an
error code.
DEFAULT SETTINGS
Each cooking mode has a default temperature, used when the knob is in the PRESET position.
The Special Features menu lets you adjust the presets for each mode. You can also set the
oven to save the last used temperature for each cooking mode as a new default. See "SPECIAL
FEATURES MENU" on page 33.
FAILURE NUMBER CODES
These codes are displayed when the electronic control detects a problem in the oven or in the
electronics. See "SOLVING OPERATIONAL PROBLEMS" on page 42.
12
©2019 Hestan Commercial Corporation
THE DOOR MUST REMAIN CLOSED WHEN POWER IS SUPPLIED TO
THE APPLIANCE .
and keys for 3
+ -
.
AM