hestan KSO 30 Manuel D'utilisation Et D'entretien page 12

FEATURES AND CONTROLS
CENTRAL DISPLAY FOR TIME AND STATUS:
AM/PM indication present for time of day, minute minder, and automatic cooking.
EN
Status indications show which cavity is currently selected and whether any door has been
locked, automatically for self-clean or manually by the user.
TEMPERATURE DISPLAY
Shows the temperature setpoint for the current cooking mode, in the selected cavity. Indicates
temperature units (° C or ° F) .
COOKING MODES DISPLAY:
Displays the name of the selected function.
KNOBS
Cooking mode selector (multifunction), with seven cooking modes + CLEAN and OFF positions.
Temperature selector with PRESET and CLEAN positions + continuous range between MIN and
MAX values. See "SETTING COOKING MODE AND TEMPERATURE" on page 18 for more
information.
OVERVIEW OF COOKING MODES
The following illustrations give an overview of what happens in the oven with each mode
setting. The name of each mode is shown, with the text shown on the oven display in brackets
[ ]. The arrows represent the location of the heat sources during specific modes. The lower
element is concealed under the oven floor.
For usage instructions, see "SETTING COOKING MODE AND TEMPERATURE" on page 18.
Convection Bake cooks with heat from a ring element behind the back wall of the oven. The
heat is circulated throughout the oven by the convection fan.
Bake cooks with heated air. Both the upper and lower elements cycle to maintain the oven
temperature.
Dehydrating is similar to convection cooking but holds an optimum low temperature while
circulating the heated air to remove moisture slowly for food preservation.
10
©2019 Hestan Commercial Corporation
Convection Bake [CONV BAKE]:
Set temperature from 170° F [75° C] to 550° F [290° C]
Preset position 325° F [165° C]
Bake [BAKE]:
Set temperature from 170° F [75° C] to 550° F [290° C]
Preset position 350° F [175° C]
Dehydrate* [CONV DEHY]:
Set temperature from 120° F [50° C] to 160° F [70° C]
Preset position 140° F [60° C]
* Dehydrate, Proof, Defrost, and Warming are Low Temp functions. The
Low Temp icon is used for all of them.
(CONT.)