Beurer BC 81 Mode D'emploi page 25

Average values
• Press M1 or M2 as
desired.
A flashes on the display.
The average of all saved
measurements for this user
memory is displayed.
• Press M1 or M2 again.
AM flashes on the display.
The average value of morning
measurements for the last seven
days is displayed
(5.00 AM – 9.00 AM).
• Press M1 or M2 again.
PM flashes on the display.
The average value of eve-
ning measurements for the
last seven days is displayed
(6.00 PM – 8.00 PM).
Individual measured values
• Press M1 or M2 again
to display the last indi-
vidual measurement (in
this example, measure-
ment 03).
• Press M1 or M2 again to
view individual measure-
ments.
• To switch the device off,
press the START/STOP button
You can exit the menu at any time by pressing
the START/STOP button
Deleting measured values
• To clear the memory of the relevant user memory,
first select a user memory.
• Access an individual measurement as
described above.
• Press and hold both the
M1 and M2 buttons for
5 seconds.
CL and 00 appear on the
LCD Display.
25
.
.