Beurer BC 81 Mode D'emploi page 14

NOTICE:
• Never use different types of batteries, battery
brands or batteries with different capacities.
This may damage the unit. You should prefer-
ably use alkaline batteries.
• Never use rechargeable batteries. This may
damage the unit.
• Always replace all batteries at the same time
and use batteries of the same type.
• Replace weak batteries before they discharge
completely.
• When and
please change the batteries.
4
• Leaking batteries may damage the device. If
you do not intend to use the unit for longer
periods, remove the batteries from the bat-
tery compartment before placing the device
in storage.
Setting the hour format, date and time
This menu allows you to set the following func-
tions, one after another.
Hour format
➔
appears in the display,
Date Time
➔
If date and time are not set, you will not be able to
save your measured values correctly with a date
and time and access them again later.
Press and hold the M1 or M2 memory but-
tons to scroll values more quickly.
Hour format
• Press and hold the START/STOP but-
ton for 5 seconds until "12 h" flashes
in the LCD Display.
• Select the desired hour format using
the M1/ M2 memory buttons and confirm with
the START/STOP button.
Date
The year flashes in the LCD Display.
• Select the year using the M1/M2
memory buttons and confirm with
the START/STOP button.
The month then flashes in the LCD Display.
• Select the minute with the M1/M2 mem-
ory buttons and confirm with the START/
STOP button.
14