Publicité
Les langues disponibles
Les langues disponibles
NOTE. The ice produced with the decalcifi-
cation solution is yellowish and smooth. In
this phase, there are loud noises from the
freezer due to the rubbing between the rising
ice and the evaporator walls. In this case, it is
recommended that the equipment should be
switched off for some minutes, so that the
decalcification solution in the freezer can be
released.
10When all the cleaning solution has been used
up, open the water shutoff valve to allow new
fresh water to flow into the reservoir. Let the
unit to continue to run until the ice resumes
the normal colour and hardness.
11Stop the icemaker and pour warmwater on
the ice deposited into the storage bin tomelt
it up.
ATTENTION use ice produced with the
cleaner solution. Be sure none remains
in the bin.
12Left the unit running for approx 10 minutes
then remove the copper wire used to jump
the two sensors for the water level and place
back correctly the cover on the float reser-
voir.
GB
GB
41
Publicité
