Tern PEDELEC Manuel D'utilisateur page 19

As a general guideline, the Child Seat should be mounted as far
forward as possible for keeping the weight centralized. Mounting
the Child Seat too far behind the Rear Wheel axis may cause the
Front Wheel to lift off the ground unintentionally.
Always check thoroughly the balance. Mount the Child Seat and
load with dummy weight equivalent to that of the child. Test ride
in various road conditions including riding uphill and make sure
the Front Wheel does not have tendency to lift off the ground.
The Child Seat should NOT be mounted or attached to
the seatpost.
Approved Child Seat
The Thule Yepp Maxi Easyfit is approved for use with your Tern.
Safety and Precautions
Children – regardless of age – should be strong enough to hold up their head and withstand the bouncing that comes with riding.
Check for sufficient heel clearance. Heel clearance varies with the rider's foot size and the child's leg length.
Make sure the seat is properly mounted in accordance with the manufacturer's instructions.
Make sure the maximum gross weight is not exceeded.
Make sure that nothing can get caught in the Wheel Spokes, Saddle Rails, and Springs.
Make sure the child is wearing a helmet and the straps are adjusted for a snug fit.
Always hold onto your pedelec when a child is in the child seat to prevent the pedelec and child from falling over.
Periodically check on your child while riding as they may fall asleep. Don't let their head strain excessively to one side.
Do not use trailers to transport children.
EN
ES
FR
IT
KO
19