Before Every Ride - Tern PEDELEC Manuel D'utilisateur

8. Before Every Ride

Be sure to check the following before every ride:
Electrical System
Check that the battery is seated properly in the carrier on the frame and fully plugged in.
Check the controller display for any warnings or error messages. Resolve the error before riding.
Check that the battery is adequately charged for the length of ride you are planning to do.
Make sure the front and rear lights are illuminated when they are actuated and remain on when the bike is at a standstill.
Mechanical
As with all mechanical components, the bicycle is subjected to wear and high stresses. Different materials and components
might react to wear or stress fatigue in different ways. If the design life of a component has been exceeded, it may suddenly
fail, possibly causing injuries to the rider. Any form of crack, scratches, or change of coloring in highly stressed areas indicate
that the life of the component has been reached and it should be replaced.
EN
ES
FR
IT
KO
13