IMEON ENERGY IMEON 3.6 Manuel D'installation page 81

IMEON INVERTER
3. The message "Starting battery manager" will be displayed
4. Start the battery physically. The Battery Status indicates "Detecting battery in progress".
5. When the message "Battery ready to start" appears, move
the Battery State switch to "ON" position on the WEB
interface.
6. When the "Battery operating" message is displayed, the
battery is operational and communicates with IMEON.
6.3.3.2 Using a Lead-Acid battery
1. Select the lead battery technology used (GEL, AGM, OPz) and press "Ok".
2. Wait a few seconds for the inverter to be configured.
3. Set the capacity of the batteries in Wh
Note: A more advanced setting is possible (voltage, current setting) with a different connection code
held by your distributor.
6.3.4 « Manager » page : SCAN
The "Scan" tab is available only in "installer" mode. It allows you to scan, record and export the real
time values.
Manuel d'installation / Installation guide IMEON Inverter – Rev B.5
FR
FR
EN
81