IMEON ENERGY IMEON 3.6 Manuel D'installation page 71

IMEON INVERTER
Indicators
/ /
Manuel d'installation / Installation guide IMEON Inverter – Rev B.5
Units
Indicates AC OUPUT active power, apparent
power, frequency and voltage
kW: Active Power L1N, L2N, and L3N.
kVA: Apparent power L1N, L2N, and L3N.
Hz: Frequency L1N, L2N, and L3N.
V: Voltage L1N, L2N and L3N.
Indicates BATTERY voltage, charge current and
percentage of charge
A: Current.
V: Voltage.
% : percentage of charge (displayed for
information only because it depends on
several parameters)
Indicates AC GRID input voltage and frequency.
V: Voltage L1N, L2N and L3N.
Hz: Frequency L1N, L2N and L3N.
Indicates PV input voltage and power.
Today kWh: Today Production.
Total kWh: Total Production.
Indicates the generated PV production of both
DC INPUT P1 and P2.
kW: Active power.
A: Current.
V: Voltage.
Indicates the PV MPPT P1 and P2 of both MPPT
trackers. If any of the icons flashes, that means
that the dedicated array is unavailable.
Indicates the grid.
If the icon flashes, that means the grid is
unavailable.
Indicates the battery state of charge.
- Left icon : battery fully charged
- Center icon: If the icon flashes, that means
the battery is unavailable
- Right icon: battery has a low voltage
Indicates that the AC OUTPUT is activated and
the delivery of power to the load.
Indicates the Output power level
Indicates an overload
Indicates that IMEON is up and running
Indicates an error in the system
FR
FR
EN
71