Preparing The Digitradio 1 For Use; Inserting The Battery - TechniSat DIGITRADIO 1 Manuel D'utilisation

5.3

Preparing the DIGITRADIO 1 for use

5.3.1 Inserting the battery

> Open the battery compartment at the back of the device by pushing the
battery compartment cover in the direction of the arrow marked on the side.
Then remove the cover.
> Insert the DIGITRADIO 1 battery, paying attention to the alignment of the gold
contacts with one another. Push it under the plastic guide within the battery
compartment.
The DIGITRADIO 1 battery can also be purchased separately in retail outlets.
28
> Place the battery compartment cover back on the battery compartment (1) and
push it shut until it audibly clicks into place (2).
1
2
The battery is charged as soon as the device is connected to the mains
network. The charge status is shown in the display by way of a battery symbol.
Replace or recharge the battery when it is dying.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
29