Cable Sizes; Conditions Of Warranty; Ec Declaration Of Conformity - SDMO Alizé 6000 E Manuel D'utilisation Et D'entretien

11. Cable sizes

Rated current (A)
6
8
10
12
16
18
24
26
28

12. Conditions of warranty

Faults covered by the guarantee.
The supplier undertakes to rectify all operating problems resulting from defects in design, materials and
workmanship. This obligation does not apply to damage resulting from materials supplied by, or adjustments
made by the buyer. The guarantee excludes incidents resulting from accident or force majeure, and also excludes
replacements or repairs necessary as a result of normal usage of the equipment, or from deteriorations or
accidents arising from negligence, lack of supervision or maintenance or from improper use of the equipment.
The guarantee is strictly limited to the free replacement or repair in our factory workshops of parts showing
defects in materials or manufacture. The supplier cannot be held responsible for consequences arising directly or
indirectly from the defectiveness of a part.
Length of guarantee and when it starts.
Unless otherwise stipulated, this clause only applies to faults occuring within a period of:
- 24 months or 150 operating hours (whichever is reached first) for private use (applies to the OPEN
and SILENT ranges).
- 12 months or 1,000 operating hours (whichever is reached first) for professional use.
NB Private use refers to occasional operation by the consumer for their own personal use for the sole purpose of
DIY.
The guarantee period runs from the day on which the buyer is advised in writing by the supplier that the
equipment is at his disposal.
If dispatch is delayed, the guarantee period will be extended by the length of the delay.
Damages
Responsibility is strictly limited to the obligations outlined herein, and it is expressly understood that the supplier
will not be accountable to the buyer for any wrong or damage suffered such as personal injury, damage to goods
(other than that mentioned in the guarantee) or loss of income. The clauses of the guarantee are applicable only to
the first-hand buyer, and cannot be transferred to a second buyer.
Insurance of workforce
In the case of accidents arising at any time and for any reason whatsoever, the responsibility of the supplier is
strictly limited to his own staff and their equipment.
NB All written or verbally communicated orders, as well as acceptance of our offers, imply the formal acceptance
of our conditions of sale.
In the case of a claim under guarantee, carriage costs outward will be borne by the buyer.

13. EC Declaration of conformity

We, SDMO, 12 bis rue de la Villeneuve, CS 92848, 29228 BREST CEDEX 2, declare that generating sets of the type "Alizé 6000 E" comply with the
provisions of the EC Council Directives in force at the date of manufacture:
- Machine directive 98/37/EEC of 22nd June 1998.
- Low voltage electrical equipment directive 73/23/EEC of 19th July 1973, amended by directive 93/68/EEC of 22nd July 1993.
- Directive 2000/14/EC of 08/05/2000 relating to noise emissions in the environment.
- Electromagnetic compatibility directive 89/336/EEC of 3rd May 1989, amended by directive 92/31/EEC of 28th April 1992 and directive
93/68/EEC of 22nd July 1993, and conform to the following standards or other normative documents:
EN12601/EN1679-1/EN 60204-1
o
IEC 34.1/EN 60034-1
o
EN 50081-2/EN 50082-2.
o
8/8
0 – 50 metres
2
1.5 mm
2
1.5 mm
2
2.5 mm
2
2.5 mm
2
2.5 mm
2
4.0 mm
2
4.0 mm
2
6.0 mm
2
6.0 mm
Ref. GPAO : 33522118801
Cable lengths
51 – 100 metres
2
1.5 mm
2
2.5 mm
2
4.0 mm
2
6.0 mm
2
10.0 mm
2
10.0 mm
2
10.0 mm
2
16.0 mm
2
16.0 mm
03/2004
G. Le Gall
101 – 150 metres
2
2.5 mm
2
4.0 mm
2
6.0 mm
2
10.0 mm
2
10.0 mm
2
10.0 mm
2
16.0 mm
2
16.0 mm
2
16.0 mm
Guarantee certificate
The generating set detailed below
Generating set serial no:
Motor serial no:
is guaranteed from that date.
AGENT:
Stamp and signature