Annex; Ec Compliance Statement - Kemper SmartFil Notice D'utilisation

9 Annex

9.1 EC compliance statement

Designation:
Series:
Type:
Machine ID:
Company:
The following harmonised standards are used:
EN ISO 12100
EN ISO 13857
EN 349
EN 61000-6-2
EN 61000-6-4
EN 60204-1
EN 13849-1
A complete list of standards, directives and specifications applied is available from the manufacturer. The
operating manual belonging to the product is available.
Additional information:
If it is not used for as intended or the design is altered, the Declaration of Conformity expires, unless
confirmed in writing by us as manufacturers.
Vreden, 17.02.2020
Place, date
1502818-00
Welding fume filter unit
SmartFil
64650 (if necessary, different item numbers for other product
variants)
See nameplate in front section of this operating manual
This product is developed, designed and manufactured in
accordance with EC directives
2006/42/EC – Machinery Directive
2014/30/EU – Electromagnetic compatibility
2014/35/EU – Low Voltage Directive
on the sole responsibility of
KEMPER GmbH
Von-Siemens-Str. 20, D-48691 Vreden
Safety of machinery - General principles for design
Safety of machinery - Safety distances
Safety of machinery - Minimum gaps
Electromagnetic compatibility (EMC) - Immunity
Electromagnetic compatibility (EMC) - Emission
Safety of machinery - Electrical equipment of machines
Safety of machinery - Safety-related parts of control systems
B. KEMPER
CEO
Identification of the signatory
- 61 -
EN