Markings And Signs To Be Affixed By The Operating Company; Safety Instructions For Operating Staff; Safety Instructions For Maintenance And Troubleshooting - Kemper SmartFil Notice D'utilisation

EN

2.3 Markings and signs to be affixed by the operating company

The operating company is obliged to post further notes and signs on the product and its
surrounding area if necessary.
Such markings and signs might be related, for example, to the requirement for wearing
personal protective equipment.

2.4 Safety instructions for operating staff

Before use, the operator of the product must be instructed through information,
instructions and training on the handling of the product and the materials and aids to be
used.
The product system may only be used in technically perfect condition, for its intended
purpose, in full awareness of the safety aspects and potential dangers and in accordance
with these instructions. All errors, especially those that may affect safety, must be removed
immediately.
Every person who is charged with commissioning, operation or maintenance must have
fully read and understood these operating instructions. Once they are working on the
machine, it is too late. This specifically applies to staff who only operate the product
occasionally.
The operating instructions must always be within reach of the product.
We accept no liability for any damages or injuries caused by failure to observe these
operating instructions.
The relevant accident prevention regulations and other generally recognised safety and
occupational health regulations must be observed.
The responsibilities for the various activities included in maintenance and repair must be
clearly defined and adhered to. Only then will human error - especially in dangerous
situations - be avoided.
The operating company is to enforce wearing of personal protective equipment by
operating and maintenance staff. These include in particular safety shoes, safety glasses
and gloves.
Do not wear loose, long hair, loose clothing or jewellery. In theory, there is a risk of getting
caught on something, or being pulled in or dragged along by moving parts.
If there are any safety-related changes to the product, immediately halt the process, secure
it and report the occurrence to the relevant authority/person!
Work on the product may only be carried out by reliable, trained staff. Observe the
minimum legal age.
Staff who require training, teaching or instructing or staff who undergo a general
apprenticeship may only operate the product under the supervision of an experienced
member of staff.

2.5 Safety instructions for maintenance and troubleshooting

Service and maintenance doors must be freely accessible at all times.
1502818-00 - 40 -