Intended Use - Kemper SmartFil Notice D'utilisation

• Version – IFA tested
The standard version of the product is IFA tested.
This means the product fulfils the requirements of DIN EN ISO 15012 -1 + 4 for welding
fume separation class W3. Adherence to this standard is tested by the IFA (Institute for
Occupational Safety and Health of the German Social Accident Insurance).
For the sake of simplification, in this operation manual this is indicated in the following
with an IFA notice logo.
The IFA notice logo highlights important notes and information relating to the IFA
product.
Labelling on the product
IFA
The IFA version is labelled, on the product, with the DGUV test symbol and a W3 label
(identification of the welding fume class).

3.3 Intended use

The product is designed to extract welding fumes from electric welding at their source and
filter them out. In general, the product can be used for all work processes in which welding
fumes are released. However, it is important to ensure that no "sparks" are drawn into the
product from, e.g. a grinding process.
Dimensions and further product details which must be observed can be found in the
technical data.
1502818-00
Meaning/explanation
Type IFA-tested according to
DIN EN ISO 15012-1 (2013)
DIN EN ISO 15012-4 (2016)
Tab. 13: IFA label
- 44 -
EN
Reference logo