Assembly - Kemper SmartFil Notice D'utilisation

5 Assembly

NOTE
The product operator may only assign the independent assembly of the product to
personnel who are familiar with this task.
Two people are needed to assemble the product.
You must ensure that the welding current return line between the workpiece and the
welding machine has a low resistance and that connections between the workpiece and
the product are avoided so that the welding current cannot flow back to the welding
machine via the product's protective conductor.
NOTE
If add-on products are also present, follow the appropriate manuals when assembling
them.
1502818-00
Fig. 9: Assembly
- 49 -
EN