Markings And Signs On The Product; Residual Risk - Kemper SmartFil Notice D'utilisation

• is mixed with flammable, combustible dusts and/or substances which may form
explosive mixtures or atmospheres;
• is mixed with other aggressive or abrasive dust which could damage the product and
the filter elements employed;
• is mixed with organic, toxic substances or a proportion of substances which are
released when cutting the material.
2 Exterior locations where the product is exposed to the weather
- the product may only be installed in enclosed buildings.
If there is an outdoor version of the product available, then this may be installed
outside.
No reasonable, foreseeable misuse is possible which could lead to dangerous situations
with personal injury when working with the product whilst adhering to its intended use.

3.5 Markings and signs on the product

Various markings and signs are affixed to the product. If these are damaged or removed,
please replace them immediately with new ones in the same location.
The operating company is obliged to post further notes and signs on the product and its
surrounding area if necessary.
Such notes and signs might be related, for example, to the requirement for wearing
personal protective equipment.

3.6 Residual Risk

Even when all safety rules are observed, when operating the product a residual risk
remains, as described below.
All persons working on and with the product must be aware of these residual risks and
follow the instructions that prevent these residual risks from causing accidents or
damages.
1502818-00 - 46 -
EN