Safety; General Information; Information On Signs And Symbols - Kemper SmartFil Notice D'utilisation

2 Safety

2.1 General information

The product is designed and built according to state-of-the-art technology and the
recognised safety rules and regulations. When operating the product, technical hazards for
the operator or impairment of the product as well as other property may occur, if:
• it is not operated by trained or instructed personnel
• it is not used for the purpose intended and/or
• it is improperly maintained

2.2 Information on signs and symbols

DANGER
This symbol in conjunction with the signal word "Danger" indicates imminent danger.
Non-adherence of the safety note leads to death or serious injuries.
WARNING
The symbol in conjunction with the signal word "Warning" indicates a potentially
dangerous situation. Non-adherence to the safety notice may lead to death or serious
injuries.
CAUTION
The symbol in conjunction with the signal word "Caution" indicates a potentially
dangerous situation. Non-adherence of the safety note may lead to slight or negligible
injuries.
May also be used for warnings against property damage.
NOTE
The general information is simple additional information which does not warn about
personal injury or property damage.
1. Enumerations of action steps are marked as numbers with a dot, where the order is
important.
• Bullet points indicate lists of parts in a legend or instructions for which the sequence is
unimportant
1502818-00 - 39 -
EN