Emergency Measures - Kemper SmartFil Notice D'utilisation

7.5 Emergency measures

In case of fire of the product or its detection elements, the following steps should be taken
if necessary:
1. Where possible, disconnect the product from the power supply by unplugging.
2. If present, disconnect the compressed air supply.
3. Fight fire with a commercially available dry powder extinguisher.
4. Notify local fire brigade if necessary.
WARNING
For products with maintenance door, do not open the maintenance door. Flash flame
formation!
In the event of a fire, do not touch the product under any circumstances without proper
protective gloves. Risk of burns!
1502818-00 - 59 -
EN