Distinguishing Feature - W3/Ifa Certified; Intended Use - Kemper SmartFil Notice D'utilisation

3.2 Distinguishing feature – W3/IFA certified
The product is manufactured in two versions:
• Version – non-IFA certified
• Version – IFA certified
See also chapter "Technical data": Welding fume class and IFA test
standard.
The standard version of the product is IFA certified.
This means that the product fulfils the requirements of the 'W3/IFA
certified' welding fume separation class. Adherence to this standard is
certified by the IFA (Institute for Occupational Safety and Health of the
German Social Accident Insurance).
For the sake of simplification, in this operation manual this is indicated in
the following with an IFA notice logo.
The IFA notice logo highlights important notes and information relating to
the IFA product.
Labelling on the
product
IFA
The IFA version is marked, on the product, with the DGUV test symbol and
a W3/IFA certified (identification of the welding fume class) label.

3.3 Intended use

The product is designed to extract welding fumes from electric welding at
their source and filter them out. In general, the product can be used for all
work processes in which welding fumes are released. However, it is
important to ensure that no "sparks" are drawn into the product from, e.g.
a grinding process.
Dimensions and further product details which must be observed can be
found in the technical data.
1502818-03
Meaning/explanation
Type "IFA certified" according to
test standard – see chapter
"Technical data"
Tab. 13: IFA label
- 50 -
EN
Reference
logo