Annex; Ec Compliance Statement - Kemper SmartFil Notice D'utilisation

9 Annex

9.1 EC compliance statement

Designation:
Series:
Type:
Machine ID:
Company:
The following harmonised standards are used:
EN ISO 12100:2010 Safety of machinery - General principles for design
EN ISO 13857:2019 Safety of machinery - Safety distances
EN ISO 13854:2019 Safety of machinery - Minimum gaps
EN ISO 21904-1:2020 Health and safety in welding and allied processes
EN IEC 61000-6-2:2019 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards -
Immunity standard for industrial environments
EN IEC 61000-6-4:2019 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environments
EN 60204-1:2018 Safety of machinery - Electrical equipment of machines
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems
A complete list of standards, directives and specifications applied is available from the
manufacturer. The operating manual belonging to the product is available.
Additional information:
If it is not used for as intended or the design is altered, the Declaration of Conformity
expires, unless confirmed in writing by us as manufacturers.
Vreden, 05.10.2021
Place, date
1502818-03
Welding fume filter unit
SmartFil
64650 (if necessary, different item numbers for other product
variants)
See name plate in front section of this operating manual
This product is developed, designed and manufactured in
accordance with EC directives
2006/42/EC – Machinery Directive
The product continues to comply with the provisions of the
2014/30/EU – EMC Directive
2014/35/EU – Low Voltage Directive
2011/65EU – RoHS Directive
At the sole responsibility of
KEMPER GmbH
Von-Siemens-Str. 20, D-48691 Vreden
B. KEMPER
- 71 -
CEO
Identification of the signatory
EN