Kemper SmartFil Notice D'utilisation page 67

Fig. 13: Filter replacement – Installing the filter element
Item Description
1 Filter element
2 Gasket ring
Tab. 17: Filter replacement – Installing the filter element
6. Clean the sealing surface (item 5) on the product with a damp cloth.
7. Push the new filter element back into the product mounting (item 4) in
reverse order. Ensure the sealing ring (item 2) does not rub against the
sealing surface (item 5) and is not deformed or destroyed.
8. Reinsert the mains plug back into the socket and switch the product on.
The green signal lamp of the device switch indicates fault-free
operation.
1502818-03
Ite Description
m
4 Mounting frame
5 Sealing surface
- 67 -
EN