Kemper SmartFil Notice D'utilisation page 59

Item Description
1 On/Off switch
2 Signal light
3 Installation opening for start/stop connection
socket (optional fitting)
(closed with dummy plug)
4 Pressure measurement opening (only for service
employees)
5 Signal horn
6 Pressure switch (closed with dummy plug)
(service personnel only)
• I/0 switch (item 1)
The product is switched on and off by pressing the switch.
The green indicator lamp of the switch indicates trouble-free operation
of the product or the readiness for operation when using an optional
start/stop sensor.
• Indicator lamp (Pos. 2)
If the yellow indicator lamp lights, the following faults may have
occurred:
• Motor protection switch has triggered
• Phase error/missing phase
• Filter change necessary
• Installation opening for start/stop connection socket (Pos. 3)
Installation opening for the optional fitting of the automatic start/stop
system.
• Pressure measuring opening (Pos. 4)
Connection facility for our service department. Our service department
can take pressure measurements using this connection.
1502818-03
Tab. 15: Operating elements
- 59 -
EN
Note