geo-FENNEL FET 220K-L Mode D'emploi page 18

EN
FUNCTIONS OF BUTTONS
BUTTON
0SET
R/L
HOLD
V/%
SFT + SFT
SFT + 0SET
SFT + R/L
SFT + REP
SFT + V/%
DISPLAY INDICATION
VT
n-6
HR
HL
T1
T2
CRN
SFT
%
REP
HLD
18
FUNCTION
Power ON/OFF the unit; keep the button
pressed until a beep sounds
0SET of the horizontal angle
Left/right horizontal angle measurement
HOLD the horizontal angle
Vertical angle / percent display
Switch to the second button function with SFT:
Display of the electronic vial
(press fast and short)
Power ON/OFF the laser plummet
Power ON/OFF the laser point finder
Repeated angle measurement
Power ON/OFF the display illumination
Press SFT to quit the second button function.
Vertical angle
Number of repeated measurements
Right horizontal angle
Left horizontal angle
First direction
Second direction
Compensator ON (1 axis, 2 axes)
Optional function keys (second button function)
Vertical grade %
Status of repeated measurement
HOLD = Wert halten
If the display shows TILT after activating the TILT compensation function, which
means exceeded compensation range, the instrument should be aligned.