Installation; Safety Instructions; Before Installation - Burkert T-CUT Manuel D'utilisation

Type T-CUT

Installation

8 INSTALLATION
8.1 Safety Instructions
DANGER!
Risk of poisoning, chemical burns, contamination from escaping medium.
▶ Check the product for leak-tightness prior to commencing use.
▶ When handling hazardous substances, always take appropriate precautionary measures and wear personal
protective equipment in accordance with the requirements of the medium.
▶ Before disconnecting lines, the medium must be flushed from the entire system.
Risk of injury from high pressure in the system/product.
▶ Before working on the system or product, switch off the pressure and vent/drain the lines.
WARNING!
Risk of injury from improper installation.
▶ Installation may be carried out by authorized technicians only and with the appropriate tools.
Risk of injury from unintentional activation of the system and uncontrolled restart.
▶ Secure system against unintentional activation.
▶ Following installation, ensure a controlled restart.
8.2 Before Installation
→
Only remove the module from its packaging immediately before installing it in the system. Once removed from
the packaging, the module must be treated with particular care.
→
Examine the module for any external physical damage.
→
Clean the system and pipelines to ensure that soiling and oily substances cannot be flushed into the module
from the system.
New modules are supplied dry or filled with a preservative fluid. If the module is filled with preservative fluid,
please drain the module first immediately before installing it.
→
We recommend keeping the dummy plugs.
Dispose of the preservative fluid in accordance with the applicable waste disposal and environmental protection
regulations.
english
13