Operating Instructions; Product-Specific Data Sheet; Symbols; Definitions Of Terms - Burkert T-CUT Manuel D'utilisation

Type T-CUT
OperatingInstructions
1 OPERATING INSTRUCTIONS
The operating instructions describe the entire life cycle of the product. Keep these instructions in a location which
is easily accessible to every user and make these instructions available to every new owner of the product.
WARNING!
The operating instructions contain important safety information!
Failure to observe these instructions may result in hazardous situations.
▶ The operating instructions must be read and understood.
1.1 Product-specific Data Sheet
With each product, a product-specific data sheet is included containing information on the product. This infor-
mation must be noted in addition to the operating instructions.
Should you no longer have the data sheet at your disposal, you can find it on the internet at: www.cut-membrane.com.
1.2

Symbols

DANGER!
Warns of an immediate danger.
▶ Failure to observe the warning will result in a fatal or serious injury.
WARNING!
Warns of a potentially dangerous situation.
▶ Failure to observe the warning may result in serious injuries or death.
CAUTION!
Warns of a possible danger.
▶ Failure to observe this warning may result in a moderate or minor injury.
NOTE!
Warns of damage to property.
▶ Failure to observe this warning may result in damage to the product or the system.
Indicates important additional information, tips and recommendations.
Refers to information in these operating instructions or in other documentation.
▶ Designates instructions for risk prevention.
→
Designates a procedure which you must carry out.
1.3 Definitions of Terms
In these instructions, the term "product" always refers to the T-CUT tubular/pipe module.
english
5