Modbus Registers Description - Honeywell E3Point Manuel D'utilisation

Modbus Registers Description

Number
21 Reading value
23 Divisor of reading value to obtain concentration
26 Sensor status
27 High temp warning status
34 The level at which Alarm A is triggered
35 Alarm A hysteresis offset (Alr A + Hyst A = level at which alarm
is deactivated)
36 The level at which Alarm B is triggered
37 Alarm B hysteresis offset (Alr B + Hyst B = level at which alarm
is deactivated)
38 The level at which Alarm C is triggered
39 Alarm C hysteresis offset (Alr C + Hyst C = level at which alarm
is deactivated)
61 Temperature High Level limit
66 Actual buzzer status (on or off)
70 Actual relay status (on or off)
The E³Point must not be written to as this could compromise the gas
detection function.
E Point Network Gas Monitor User Manual
3
MODBUS
(RTU)
Description
37