Maintenance; Sensor Life Span - Honeywell E3Point Manuel D'utilisation

Maintenance

The unit will provide years of service with minimal care.
• Visually inspect at regular intervals to ensure optimum operating
condition (no breakage, sensor filter not blocked or clogged,
etc.).
• An accurate log of all maintenance, gas tests, and calibrations
must be maintained for the proper service of this product.
• Do not expose the sensor to high pressure water spray. Sensors
should not be exposed to solvents.
• Clean the exterior with a soft, damp cloth. Do not use solvents,
soaps, or polishes.
• Do not immerse the unit in liquids.

Sensor Life Span

Sensor life span may be affected by certain operating conditions or by
exposure to concentrations higher than the detection range.
Sensor Type
CO
H S
2
NO
2
O
2
COMB
E Point Network Gas Monitor User Manual
3
Life Span Specifications (typical)
6 years, normal use at temperatures > -10°C
2 years, in air
2 years, in air
2 years until readings are at 85% of original 20.9% input
2 years, in air
35