Temp Menu - Honeywell E3Point Manuel D'utilisation

Temp Menu

The Temp menu lets users define the maximum temperature for the
device temperature alarm, which can be used to activate a device
connected to the relay.
Press enter to access the Temp menu, then select either Disable or
Enable.
Use the arrow keys to select the reading value, either oC or oF
•
(Celsius or Fahrenheit), and press enter to select the underlined
value. This affects local display only and is not stored in
memory—it is simply a conversion aid.
• Use the arrow keys to increase or decrease the value to the
desired level and press enter.
An alarm will be triggered when the temperature reaches the specified
level and Temp Limit will displays on the screen.
The temperature measured represents the unit's internal reading and
may differ from external temperatures by up to 10°C.
The unit does not display temperature readings.
E Point Network Gas Monitor User Manual
3
* Menu *
Temp
Temp
Enable
Limit
oC
Limit
50oC
25