Using The Accessories - Electrolux EOA6841 Notice D'utilisation

14 www.electrolux.com
3. Select the category and dish. Press
OK to confirm.
4. Select the Weight Automatic . Press
OK to confirm.
5.
Touch
weight. Press OK to confirm.
The automatic programme starts. You
can change the weight at any time. Press

8. USING THE ACCESSORIES

WARNING!
Refer to "Safety information"
chapter.
8.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature.
• The core temperature.
Only use the core temperature
sensor supplied with the appli-
ance or genuine replacement
parts.
1.
Put the tip of the core temperature
sensor into the centre of the meat.
2. Activate the appliance.
3.
Put the core temperature sensor plug
into the socket on the front of the ap-
pliance.
or to set the food
or to change the weight. When
the time ends, an acoustic signal sounds.
Press a sensor field to deactivate the sig-
nal.
With some programmes turn over
the food after 30 minutes. The
display shows a reminder.
The display shows the core tempera-
ture sensor symbol.
4.
Press or
onds to set the core temperature.
5. Set the oven function and, if necessa-
ry, the oven temperature.
The appliance calculates an approxi-
mate end time. The end time is differ-
ent for different quantities of food, the
set oven temperature (minimum 120
°C) and the operating mode. The ap-
pliance calculates the end time in ap-
proximately 30 minutes.
6. Make sure that the core temperature
sensor stays in the meat and in the
core temperature sensor socket dur-
ing the cooking.
7. If necessary, you can set a new core
temperature during the cooking. To
do this, touch
8. When the meat is at the set core tem-
perature, an acoustic signal sounds.
The appliance deactivates automati-
cally.
Touch a sensor field to stop the sig-
nal.
9. Remove the core temperature sensor
plug from the socket . Remove the
meat from the appliance.
WARNING!
The core temperature sensor is
hot. There is a risk of burns. Be
careful when you remove the tip
and plug of the core temperature
sensor.
in less than 5 sec-
.