Publicité
Les langues disponibles
Les langues disponibles
Installation instructions
• Remove the appliance from the carton box, then
remove the external and internal packaging and
wrapping.
• Check to make sure the appliance is undamaged.
In case of incomplete delivery and damages, DO
NOT use the appliance. Please contact supplier
(See ==> Warranty).
• Let the appliance stand upright for about 2 hours.
This is to reduce the malfunction of the cooling
system from improper handling during transpor-
tation.
• Clean interior surface with warm water and soft
cloth. (See ==> Cleaning and Maintenance).
Operation
Placement
• Place the appliance on a stable and level surface/
floor.
• Ensure the appliance is properly levelled using
a water spirit level (not supplied). Use furniture
levelling wedges, if you detect the appliance is
not levelled or wobbling.
EN
Switching the appliance ON/OFF
• The appliance is switched ON once it is connect-
ed to the suitable electrical power supply. Simply
unplug to switch OFF the appliance.
• A sound will be heard when connected to the
power supply.
8
• Place the appliance on a horizontal, stable and
heat resist surface that is safe against water
splashes.
• Optimum working ambient temperature is be-
tween 16°C and 30°C. Otherwise, the functional-
ity will be limited.
• Ensure that there is sufficient ventilation. Keep
a minimum distance of 10 cm around the appli-
ance. Do not block the ventilation holes.
• For energy savings, always make sure the door
is closed.
• Let the appliance rest in its intended position for
about 2 hours before operating to prevent dam-
ages to the cooling circuit through shaken refrig-
erant.
• Wait at least 5 minutes before plug in again the
after unplug the appliance or power sudden
break.
• Unplug the appliance when not in use.
Publicité
