Arktic 226568 Mode D'emploi page 7

Set the temperature
• Plug into a suitable electrical outlet.
• When set indicator light is OFF, press and hold
1a. button for 3 to 4 seconds until
the display. Then, release the 1a. button & press
1a. button again.
• Next, press 1b. button to increase the setting
temperature by 1°C or press 1c. button to de-
crease by 1°C.
Switch the light ON/OFF
For 233924 and 233931
• Press 1b. button to switch ON the light.
• Press 1b. button again to switch OFF the light.
Loading the appliance
• Always let the appliance reach the set tempera-
ture before placing or beverages inside the ap-
pliance. Check the cooling temperature display
and additionally put hand into the compartment
to feel the actual temperature.
• Always cool down the beverages to their intended
temperature (< 6 °C) before storing in the appli-
ance.
Defrost
• The appliance will start defrost process automat-
ically for every 6 hours.
Shelf height adjustment
• The height of each shelf can be adjusted.
• After that, press 1d. button to confirm the setting
and exit.
is shown on Note:
• If no button is pressed within 30 seconds, the
newly set temperature will be stored automati-
cally.
• The temperature setting ranges from 2°C to
10°C.
For 226568, 233900, 233917, 235829 and 235836
Press ON/OFF switch inside the cabinet to control
the light.
• Distribute the food evenly with sufficient sur-
rounding spacings go ensure proper air circula-
tion.
• Do not exceed the maximum shelf load stated in
the technical specification.
• Ensure the doors are always properly shut and
reduced the times of opening doors to minimum.
• When def indicator is ON, the appliance is under
defrost process.
• Adjust the height of each shelf according to the
height of the items.
EN
7