Training; Energy (Kjoule/Kcal) - Kettler FB601 Mode D'emploi

Training

1. Training without presetting / Pulse mea-
surement / Readiness for training
• Press DISP button
Person 1 is displayed.
The readiness for training is displayed with 0 values.
A pulse value is displayed as soon as a pulse signal is
identified on the ear clip, hand pulse or plug recipient.
A braking level is indicated.
and / or
• Pedalling
„EX.TIME" Exercise time, "DISTANCE", energy con-
sumption and speed are displayed in increasing order.
Pedal revolutions are displayed.
Animation wheel is active.
2. Training with presettings/pulse monito-
ring
It is possible to enter time, distance and energy presettings.
When the training is started, these values count down in
reverse. If zero is reached, the display flashes and a signal
is emitted. Then the presetting value counts up.
When the pulse function is activated, pulse can be monito-
red displaying a pulse range with deviations of +/- 10
beats as well as a maximum pulse deviation which is si-
gnalled by a warning signal.
Selection of persons
The electronic system has 2 personal memories which
allow for 2 exercising persons to enter different training
presettings. This makes sense if the training shall always
be carried out using the same presettings. Thus it is not ne-
cessary any more to enter the presettings before starting
the training.
The total training time and kilometres are also stored under
person 1 and 2.
For activation you must press Activate [STORE] preset-
tings/memory for person
• Press "persons": selection of persons
Display: "Person 1 flashes, total training time and kilome-
tres"
• Switch person pressing "Plus" or "Minus"
• Confirm person with "DISP/SET"
Time presettings (EX.TIME)
• Enter values using "Plus" or "Minus" (e.g. 30:00)
Confirm with "DISP/SET".
Display:
next menu "DISTANCE"
Distance presettings (DISTANCE)
• Enter values using "Plus" or "Minus" (e.g. 7.50)
Confirm with "DISP/SET"
Display:
next menu "Age"
Energy presettings (KJOULE/KCAL)
• Enter values using "Plus" or "Minus" (e.g. 780)
Confirm with "DISP/SET".
• Select kJoule or kcal unit using "Plus" or "Minus".
Confirm "DISP/SET".
Display : next menu "Age"
FB601/610
17
GB