Télécharger Imprimer la page

Ryobi RLM18C36H225F Traduction Des Instructions Originales page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
small metal objects, that can make a
connection from one terminal to another.
Shorting
the
battery
together may cause sparks, burns, fire or
explosion.
Do not place battery products or their
batteries near fire or heat. This increases
the risk of explosion and possibly injury.
Do not open or mutilate the battery pack.
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may
be toxic if swallowed.
Protect the battery pack against moisture
and water. Do not charge the product in a
damp or wet location. Following this rule
will reduce the risk of electric shock.
In case of damage and improper use of the
battery, vapour may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapour can irritate the
respiratory system.
Do not leave the battery pack inside a
vehicle in hot or cold conditions.
Do not incinerate the battery. When the
battery is beyond its useful life, dispose of it
correctly according to the local regulations
in your area.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
LAWN MOWER SAFETY WARNINGS
Before using, always visually inspect to
ensure blades, blade bolts, and cutter
assembly are not worn or damaged.
Replace worn or damaged blades and
bolts in sets to preserve balance.
The blade on the product is sharp. Use
extreme caution and wear heavy duty
gloves when fitting, replacing, cleaning or
checking bolt security.
Bring the product to an authorised service
centre to replace damaged or unreadable
labels.
Check all nuts, bolts, and screws at
frequent intervals for proper tightness to
be sure the equipment is in safe working
condition.
pack
terminals
Check the grass box frequently for wear,
holes or deterioration.
Replace worn or damaged parts before
operating the product.
The product must be started with the user
behind the handlebars in the operator
safety zone. Never start the product if:
all four wheels are not on the ground
the grass discharge chute is exposed
without being protected by either the
mulching plug and grass discharge
chute cover, or the grass box and grass
discharge chute cover
hands and feet of all persons are not
clear of the cutting enclosure
Never operate the product if the on/off
switch on the handlebar does not properly
start and stop the product.
Never attempt to lock the on/off switches in
the on position, this is extremely dangerous.
Do not force the product. It will do the job
better and safer at the speed for which it
was designed.
Stop the blade when crossing gravel
surfaces.
Do not pull the product backward unless
absolutely necessary. If you must back the
product away from a wall or obstruction,
first look down and behind to avoid tripping
or pulling the product over your feet.
Stop the motor and allow the blade to stop if
the product has to be tilted for transportation
when crossing surfaces other than grass,
and when transporting the product to and
from the area to be mowed.
Never use the product with defective guards
or shields, or without safety devices, for
example, deflectors and/ or grass boxes,
in place.
Do not tilt the product when switching on
the motor or while the motor is running.
This exposes the blade and increases the
probability of objects being thrown.
Switch on the motor carefully according to
instructions and keep hands and feet away
from cutting area. Do not put hands or feet
near or under rotating parts. Keep clear of
the discharge opening at all times. Do not
start the machine when standing in front of
the discharge opening.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
English |
3

Publicité

loading

Ce manuel est également adapté pour:

Rlm18x36h250fRlm18c36h225Rlm18x36h240Rlm18x36h250Olm1836h