Setting The Ntp Parameters; Modifying The Parameters - LEGRAND VR61-18 Manuel De L'utilisateur

5.3.9.2 Setting the NTP parameters

The NTP service parameters which can be set are the following:
➢ Primary NTP server address
➢ Primary NTP server address
➢ NTP Enabling / Disabling
Picture 26 – NTP parameters setting

5.3.9.3 Modifying the parameters

The modification of the parameters is performed pressing on the field that is to be modified;
the parameter will be displayed on the editable string in the upper part of the page, together with
a keypad.
38 OMP06145 REV. D
UPS user manual
Manuel de l'utilisateur de l'ASI
Utilizzo dell'UPS