Assembly Instructions For The Handlebars - IBEA IB 562 Manuel D'instructions

7. ASSEMBLY INSTRUCTIONS FOR THE HANDLEBARS AND
FRONT SUPPORT WITH WHEELS
The flail mower is delivered with the handlebars and front supporto with wheels disassembled.
Remove the cardboard packaging or crate (to be disposed of in an appropriate manner, in
accordance with current regulations in force).
To assemble, proceed as follows :
- Lift the handlebar (Fig. 2 ref. A) and insert it in the support shown in Fig. 2 ref. E.
Then to fix the handlebar in the support by the screws.
- Position the support with front wheels and connect the height adjustment piece using the
screw and washer provided. Fix it to both sides on the bonnet as wellusing the screws,
washers and spacers provided.
Fix the safety bar to the special holes on the two front sides of the wheel support using the
screws, washers and nuts provided.
Before switching on ensure that the machine has been fully assembled correctly.
Figure 2
- 48 -