Technical Data - IBEA IB 562 Manuel D'instructions

3. TECHNICAL DATA OF THE MODEL IB 562
ENGINE:
ENGINE CAPACITY:
ENGINE FILTER:
WORKING WIDTH:
CUTTING HEIGHT:
CUTTING SYSTEM:
SPEED GEARS:
TRASMISSION:
GEARS:
SPEED:
START:
SERVICE BRAKE :
ROTOR BRAKE :
HANDLEBARS:
TYRES:
SIZE L x W x H (mm):
WEIGHT (kg):
ACOUSTIC PRESSURE, measured according to EN 12733 :
ACOUSTIC POWER, measured according to EN 12733 :
MEASUREMENT UNCERTAINTY
HANDLEBAR VIBRATION ( EN 12 733) AW :
MEASUREMENT UNCERTAINTY
Environmental conditions
Unless otherwise stated at the time of ordering it is understood that the machine is to work
normally in the environmental conditions covered by the following points.
Environmental conditions other than those described may cause mechanical breakage
resulting in the creation of dangerous situations for persons.
petrol HONDA GX 200
4.1 kW
in oil bath
50 cm
adjustable 20 - 80 mm
24 flail rotor
1 forward gear - 1 reverse gear
mechanical
in oil bath
forward (1) 2.5 km/h
revers (1) 1.80 km/h
recoil
on transmission pulley
on rotor drive
height adjustable
Tractor 13 x 5.00-6
1500 x 580 x 1000
108
K
U
- 42 -
89 dBA
LWA 98 dBA
1 dBA
3.8 m/s²
1.8 m/s²