Cutting Height Adjustment Lever - IBEA IB 562 Manuel D'instructions

I) CUTTING HEIGHT ADJUSTMENT LEVER
This lever serves to adjust the cutting height. Warning: if the cutting height is set too low the
following undesirable consequences may occur:
foreign objects such as stones, etc., may be thrown outwards
-
dirt and mud may accumulate inside the rotor guard, thus impeding regular discharge of
-
cut grass.
premature flail wear and possible breakage of the same.
-
M) ON SWITCH
Two-position switch:
(1) for starting the engine
(0) for switching off the engine
N) GEAR SELECTOR HANDLE
This handle is used to select the gears of the machine.
The numbered positions indicate the gear settings ( 1 st - reverse) and the letter N indicates
the neutral gear.
- 47 -