Publicité
Les langues disponibles
Les langues disponibles
EN
C
KEYPAD AND OPERATION
FHM 20
OPERATION
·
Remove the measuring pins protective cover OR insert the external moisture probe into the
"Moisture" socket on the right side of the instrument.
·
Power on the instrument with button (10).
·
Select the appropriate wood group (group A to J) with button (9) (see list on p. 16 - 18.)
·
Push the measuring pins or the external moisture probe into the wood and read the measured value.
·
Press and hold button (10) to switch the instrument off.
AUTOMATIC SHUT-OFF
The automatic shut-off of the instrument can be selected between 1 and 9 minutes.
Press button (10) to "Power on" the instrument. Then press buttons (9) and (10) simultaneously until the
required time appears (the values 00 to 09 will be shown in the display successively). "00" means that
the automatic shut-off is de-activated.
14
FHM 20_Korr_12_2014.indd 14
1. Measuring pins
2. Battery status indicator
3. Reading of measured value
4. Wood group indicator
5. Units of measurement
6. External moisture probe socket
7 . External temperature probe socket
8. Temperature selection button °C/°F
9. Wood group selection button
10. Power ON/OFF button
The battery compartment cover is located on the reverse side
of the instrument.
10.12.2014 15:27:05
Publicité
