Publicité
Les langues disponibles
Les langues disponibles
•
Always wear protective goggles when working with the blind rivet nut setting tool. Personal
protective equipment such as protective clothing, gloves, safety helmet, non-slip footwear,
ear protection and fall arresting device is recommended.
•
The air inlets for the motor must not be obstructed; do not insert any objects into them.
•
When setting down the blind rivet nut setting tool, make sure that itcannot fall.
•
Use only genuine spare parts for repair.
•
Repairs must be carried out only by skilled personnel. In case of doubt, always send in the
blind rivet nut setting tool to the manufacturer.
•
Do not use the tool without material! The blind rivet nut could be flung from the blind rivet
nut setting tool! Never turn the blind rivet nut setting tool towards yourself or towards other
persons!
2.3
Working range
Sets blind rivet nuts up to M10 aluminium, up to M8 steel and up to M6 stainless steel.
2.4
Equipment/accessories
Nosepieces:
Wrench:
Hanger:
Quick-change battery:
2.5
Technical data
Weight:
Max. setting stroke:
Drive:
Tensile force:
Noise emission:
Vibration:
M6 in working position
M4, M5 in accessory magazine
M3, M8, M10 available as special accessory on request
Hexagon screwdriver WAF 4
Concealed in housing
2,0 Ah / 14.4 V
2.3 kg (with battery, without accessory magazine)
5.5 mm
14.4 V DC motor
13,000 N
L
76.5 dB (A), measurement uncertainty K=3 dB
PA
< 2.5 m/s², measurement uncertainty K=1.5 m/s²
GB
17
Publicité
Chapitres
Dépannage
