Overview (See Fig. 1 - 5); Blind Rivet Nut Setting Tool; Use For Intended Purpose; Safety Information - Gesipa FireBird Mode D'emploi

GB
1.

Overview (see Fig. 1 - 5)

Item Description
A Threaded mandrel
B Nosepiece
C Lock nut
D Setting nut
E Lock nut
F Hanger
G Cap
H Screwdriver
I Accessory magazine
J Safety lamp
2.

Blind rivet nut setting tool

2.1

Use for intended purpose

The blind rivet nut setting tool must only be used for the purpose of setting blind rivet nuts as
described in these operating instructions. Observe the safety information!
2.2

Safety information

Caution!
The following safety rules must be observed to ensure adequate protection against electric
shock, injuries or fire hazards:
• The blind rivet nut setting tool is intended solely for the purpose of processing blind rivet nuts.
• Never overload the blind rivet nut setting tool; work within the specified working capacity.
• Never use the blind rivet nut setting tool in a humid or wet environment or close to flammable
liquids or gases. Danger of explosion!
• Ensure that the battery is properly secured in the handle.
• Always remove the battery when the blind rivet nut setting tool is not in use and for maintenance.
• Never use the blind rivet nut setting tool as a hammer.
• When not in use, keep the blind rivet nut setting tool in a dry, closed room and out of the
reach of children.
16
Fig. Item Description
2; 3 K
2; 3 L
2; 3 M
2; 3 N
2; 3 O
1 P
1 x
1
y
1
z
1
Switch
Rechargeable battery
Slide
Charge indicator
Battery charger
Set blind rivet nut
Threaded mandrel length
Setting stroke
Grip range
Fig.
1
1;5
3
5
5
4
2
2
4